Options - Zanussi ZWGB 7140 K User Manual

Table of Contents

Advertisement

Programmes
Standard 60 °C
cotton
Standard 40 °C
cotton
1) At the end of spin phase.
Off Mode (W)
The information given in the charts above are in compliance with the EU Commission regulation 1015/2010
implementing directive 2009/125/EC.

Options

Temperature button (Temp.)
Press this button to change the default temper-
ature.
Symbol
— cold water.
Spin button (Spin)
With this button you can decrease the spin
speed.
The indicator of the set speed comes on.
Rinse Hold button (Rinse Hold)
Set this function to prevent the laundry creases.
There is a water in the drum when the pro-
gramme is completed.
Super quick button (Quick Wash)
Press this button to decrease the programme
duration.
Set this function for items with light soil or items
to refresh.
Extra rinse button (Extra Rinse)
Press this button to add rinsing phases to a
programme.
Use this function for persons allergic to deter-
gents and in areas where the water is soft.
Delay start button (Delay Start)
Press this button to delay the start of a pro-
gramme from 30 minutes to 20 hours.
www.zanussi.com
Load
Energy con-
(Kg)
sumption
(kWh)
3
0.79
3
0.60
0.48
Water con-
Approximate
sumption (litre)
programme du-
34
34
Left On Mode (W)
Permanent extra rinse function
With this option you can permanently have an
extra rinse when you set a new programme.
• To activate this function press the button
"Rinse Hold" and the button "Extra Rinse" at
the same time. The indicator of the button
"Extra Rinse" comes on.
• To deactivate this function press the same
buttons again until the indicator of the button
"Extra Rinse" goes off.
Child lock function
This function prevents the children to play with
the control panel.
• To activate the function, press the button
"Temp." and the button "Spin" at the same
time until the display shows the symbol
• To deactivate the function, press the same
buttons until the symbol
You can activate the function:
• Before you press the Start/Pause button: the
appliance cannot start.
• After you press the Start/Pause button, all the
buttons and the programme knob do not op-
erate.
Acoustic signals function
The acoustic signals operate when:
• The programme is completed.
Remaining
moisture
ration (mi-
(%)
nutes)
175
169
0.48
goes off.
1)
52
52
.
9

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents