Zanussi ZWGB 7140 K User Manual page 11

B
When you use the liquid detergent:
Do not use gelatinous or thick liquid de-
–
tergents.
– Do not put more liquid then 120 ml.
– Do not set the prewash phase.
– Do not set the delay start.
A
• Measure out the detergent and the fabric
conditioner.
• Put the detergent and the fabric conditioner
into the compartments.
• Carefully close the detergent drawer.
Setting a programme
1. Turn the programme knob and set the pro-
gramme:
www.zanussi.com
To use liquid deter-
gent:
1. Remove the
drawer. Push the
drawer edge in
the place with
the arrow
(PUSH) to re-
move the drawer
easily.
2. Adjust the flap in
position B.
3. Put back the
drawer in the re-
cess.
When the flap is in
position B and you
want to use powder
detergent:
1. Remove the
drawer.
2. Adjust the flap in
position A.
3. Put back the
drawer in the re-
cess.
– The indicator of Start button flashes.
– The display shows the programme dura-
tion.
2. If necessary, change the temperature and
the spin speed or add available functions.
When you press the relevant button, the in-
dicator of the set function comes on.
Starting a programme without the delay
start
Press the Start button:
• The indicator of button Start stops to flash.
The indicator of the locked door is on.
• The programme starts and the door locks.
• The programme time decreases with steps of
one minute.
The appliance does a short spin at the start
of some washing programmes.
Starting a programme with the delay start
• Press the "Delay Start" button again and
again until the display shows the delay you
want to set. The related symbol comes on.
• Press the Start/Pause button:
The appliance starts the countdown.
When the countdown is completed, the pro-
gramme starts automatically.
You can change or cancel the delay start
before you press the Start button. After
pressing the Start button you can only cancel
the delay.
To cancel the delay start:
1. Press the Start/Pause button to set the ap-
pliance to PAUSE.
2. Press the "Delay Start" button. The display
shows '.
3. Press the Start/Pause button again to start
the programme immediately.
Interruption of a programme
1. Press the button Start/Pause. The indicator
flashes.
2. Press the button Start/Pause again. The
washing programme continues.
11