Before First Use; Daily Use - Zanussi ZWGB 7140 K User Manual

• The appliance has a malfunction.
To deactivate/activate the acoustic signals,
press the button "Rinse Hold" and the button
"Quick Wash" at the same time for 6 seconds.

Before first use

Put a small quantity of detergent in the main
wash compartment of the detergent dispenser.
Set and start a programme for cotton at the

Daily use

1. Open the water tap.
2. Connect the mains plug to the mains sock-
et.
3. Put the laundry in the appliance.
4. Use the correct quantity of detergent and
additives.
5. Set and start the correct programme for the
type of laundry and soil.
Loading the laundry
1. Open the appliance door.
2. Put the laundry in the drum, one item at a
time. Shake the items before you put
them in the appliance. Make sure not to
put too much laundry in the drum.
3. Close the door.
10
Caution! Make
sure that no
laundry stays be-
tween the seal and
the door. There is a
risk of water leakage
or damage to the
laundry.
If you deactivate the acoustic signals, they
continue operate when the appliance has a
malfunction.
highest temperature without laundry. This re-
moves all possible dirt from the drum and the
tub.
Using the detergent and additives
The detergent compartment for the
washing phase.
If you use a liquid detergent, put it im-
mediately before you start the pro-
gramme.
Liquid additives compartment (fabric
conditioner, starch).
Put the product in the compartment be-
fore you start the programme.
Flap for powder or liquid detergent.
When you set a programme with a prewash, put
the detergent for prewash phase directly into the
drum.
Using the liquid and the powder detergent
A
The default position
of the flap is A (pow-
der detergent).
www.zanussi.com