Zanussi ZWGB 7140 K User Manual page 12

Cancel a programme
1. Turn the programme knob to
the programme and to deactivate the appli-
ance.
2. Turn the programme knob again to activate
the appliance. Now, you can set a new
washing programme.
The appliance does not drain the water.
Changing the options
You can change only some options before they
operate.
1. Press the button Start/Pause. The indicator
flashes.
2. Change the options.
3. Press the button Start/Pause again. The
programme continues.
Open the door
While a programme or the delay start operates,
the appliance door is locked. The indicator
Door is on.
Caution! If the temperature and level of
the water in the drum are too high, you
cannot open the door.
To open the appliance door when the
delay start operates:
1. Press the button Start/Pause to set the ap-
pliance to PAUSE.
2. Wait until the indicator Door goes off.
3. You can open the door.
4. Close the door and press the button Start/
Pause again. The delay start continues to
operate.
To open the appliance door when the
programme operates:
1. Turn the programme knob to
vate the appliance.
2. Wait for some minutes and then open the
appliance door.
3. Close the appliance door.
4. Set the programme again.
12
At the end of the programme
• The appliance stops automatically.
to cancel
• The acoustic signals operate.
• In the display
• The indicator of the Start/Pause button goes
off.
• The door lock indicator goes off.
1. Turn the programme knob to
2. Remove the laundry from the appliance.
Make sure that the drum is empty.
3. Keep the door ajar, to prevent the mildew
and odours.
4. Close the water tap.
The washing programme is completed, but
there is water in the drum:
– The drum turns regularly to prevent the crea-
ses in the laundry.
– The door lock indicator is on. The door stays
locked.
– You must drain the water to open the door.
To drain the water:
1. Set the Drain or the Spin programme.
2. Press the Start/Pause button . The appli-
ance drain the water and spin.
3. When the programme is completed and the
door lock indicator goes off, you can open
the door
4. Turn the programme knob to
vate the appliance.
Stand by
Some minutes after the end of the washing pro-
gramme, if you do not deactivate the appliance,
the energy saving status activates.
The energy saving status decreases the energy
consumption when the appliance is on the
to deacti-
standby.
• All indicators and the display go off.
• The indicator of button Start flashes slowly
Press one of the buttons to deactivate the ener-
gy saving status.
comes on.
.
to deacti-
www.zanussi.com