Before First Use - Zanussi ZWF 61400W User Manual

Off Mode (W)
The information given in the chart above are in compliance with the EU Commission regulation
1015/2010 implementing directive 2009/125/EC.
OPTIONS
TEMP.
With this option you can change the default
temperature.
Indicator = cold water.
The indicator of the set temperature comes on.
CETRIFUGEREN/ESSORAGE
With this button you can set one of these options:
The indicator of the set option comes on.
• Automatic spin reduction
Set this option to decrease the maximum spin
seed to a half, but not less than 400 rpm.
Suitable for very delicate fabrics.
• Rinse Hold
Set this option to prevent the laundry creases.
The drum turns regularly to prevent the laundry
creases.
There is a water in the drum when
the programme is completed. The
door stays locked. You must drain
the water to unlock the door. To
drain the water refer to 'At the end
of the programme'.
SETTINGS
PERMANENT EXTRA RINSE
With this option you can permanently have an extra
rinse when you set a new programme.

BEFORE FIRST USE

1. Put a small quantity of detergent in the
compartment for washing phase.
2. Set and start a programme for cotton at the
highest temperature without laundry.
1) See in "Settings" how to activate this option.
0,48
Left On Mode (W)
SNEL/RAPIDE
Press this button to decrease the programme
duration.
Set this option for items with light soil or items to
refresh.
EXTRA RINSE
With this option you can add some rinses to a
washing programme.
Use this option for persons allergic to detergents
and in areas where the water is soft.
The related indicator comes on.
STARTUITSTEL/DÉPART DIFFÉRÉ
With this option you can delay the start of a
programme by 3, 6 or 9 hours.
The indicator of selected delay comes on.
• To activate/deactivate this option press
Centrif./Essorage and Snel/Rapide at the same
time until the indicator
This removes all possible dirt from the drum and the
tub.
0,48
1)
comes on/goes off.
9