Advanced Setup - ECS 945GCT-M2 Manual

30
Type (Auto)
Use this item to configure the type of the IDE device that you specify. If the feature is
enabled, it will enhance hard disk performance by reading or writing more data during each
transfer
LBA/Large Mode (Auto)
Use this item to set the LBA/Large mode to enhance hard disk performance by optimizing
the area the hard disk is visited each time.
Block (Multi-Sector Transfer) (Auto)
If the feature is enabled, it will enhance hard disk performance by reading or writing more
data during each transfer.
PIO Mode (Auto)
Use this item to set the PIO mode to enhance hard disk performance by optimizing the hard
disk timing.
DMA Mode (Auto)
DMA capability allows user to improve the transfer-speed and data-integrity for compatible
IDE devices.
S.M.A.R.T. (Auto)
The S.M.A.R.T. (Self-Monitoring, Analysis and Reporting Technology) system is a diag-
nostics technology that monitors and predicts device performance. S.M.A.R.T. software
resides on both the disk drive and the host computer.
32Bit Data Transfer (Enabled)
Use this item to enable or disable 32Bit Data Transfer.
Press <Esc> to return to the Standard CMOS Setup page.

Advanced Setup

This page sets up more advanced information about your system. Handle this page with
caution. Any changes can affect the operation of your computer.
CMOS Setup Utility - Copyright (C) 1985-2005, American Megatrends, Inc.
CPU TM function
Max CPUID Value Limit
Execute Disable Bit
Intel (R) SpeedStep (tm) tech.
Enhanced Halt (C1E)
Quick Power on Self Test
Boot up Numlock Status
APIC Mode
Boot Other Device
Security Check
Advanced Setup
Enabled
Disabled
Disabled
Disabled
Enabled
Enabled
On
Enabled
Enabled
System
: Move Enter : Select
+/-/: Value
F1:General Help F9: Optimized Defaults
Using BIOS
Help Item
For the processor its
CPUID belows 0F41h.
TM2 only can be enabled
under below setting.
1 . F r e q . > = 3 . 6 G H z
FSB800
2. Freq. >= 2.86GHz
FSB533
F10: Save and Exit
ESC: Exit