Table of Contents
Advertisement
Video (EGA/VGA)
This item defines the video mode of the system. This main-
board has a built-in VGA graphics system; you must leave this
item at the default value.
Halt On (All Errors)
This item defines the operation of the system POST (Power
On Self Test) routine. You can use this item to select which
types of errors in the POST are sufficient to halt the system.
Base Memory, Extended Memory, and Total Memory
These items are automatically detected by the system at start
up time. These are display-only fields. You cannot make
changes to these fields.
Advanced BIOS Setup Option
This option displays advanced information about your system.
CMOS Setup Utility – Copyright (C) 1984 – 2001 Award Software
Anti-virus Protection
CPU L1 & L2 Cache
Quick Power On Self Test
First Boot Device
Second Boot Device
Third Boot Device
Boot Other Device
Swap Floppy Drive
Boot Up Floppy Seek
Boot Up NumLock Status
Gate A20 Option
ATA 66/100 Cable MSG
Typematic Rate Setting
x Typematic Rate (Chars/Sec)
x Typematic Delay (Msec)
Security Option
APIC Mode
OS Select For DRAM > 64MB
HDD S.M.A.R.T Capability
↑ ↓ → ← : Move Enter : Select
F5:Previous Values
Advanced BIOS Features
[Disabled ]
[Enabled]
[Enabled]
[Floppy]
[HDD-0]
[LS120]
[Enabled]
[Disabled]
[Enabled]
[On]
[Fast]
[Enabled]
[Disabled]
6
250
[Setup]
[Enabled]
[Non-OS2]
[Disabled]
+/-/PU/PD:Value:
F10: Save ESC: Exit
F6:Fail-Safe Defaults
44
Item Help
Menu Level
Allows you to choose
the VIRUS warning
feature for IDE Hard
Disk boot sector
protection. If this
function is enabled
and someone attempts
to write data into this
area, BIOS will show a
warning message on
screen and alarm beep
F1:General Help
F7:Optimized Defaults
Advertisement
Table of Contents
