Connecting I/O Devices - ECS 945GCT-M2 Manual

22

Connecting I/O Devices

The backplane of the motherboard has the following I/O ports:
PS2 Mouse
PS2 Keyboard
Serial Port (COM1)
VGA Port
LAN Port
USB Ports
Audio Ports
Use the upper PS/2 port to connect a PS/2 pointing device.
Use the lower PS/2 port to connect a PS/2 keyboard.
Use the COM port to connect serial devices such as mice or fax/
modems.
Connect your monitor to the VGA port.
Connect an RJ-45 jack to the LAN port to connect your com-
puter to the Network.
Use the USB ports to connect USB devices.
Use the three audio ports to connect audio devices. The first jack
is for stereo line-in signal. The second jack is for stereo line-out
signal. The third jack is for microphone.
This motherboard may adopt 8-channel audio ports that corre-
spond to the A, B, C, and E port respectively. In addition, all of the
3 ports, B, C, and E provide users with both right & left channels
individually. Users please refer to the following note for specific
port function definition.
A: Center & Woofer
B: Back Surround
C: Side Surround
The above port definition can be changed to audio input or audio
output by changing the driver utility setting.
Installing the Motherboard
D: Line-in
E: Front Out
F: Mic_in Rear