Connecting Case Components - ECS 945GCT-M2 Manual

Connecting Case Components

After you have installed the motherboard into a case, you can begin connecting the
motherboard components. Refer to the following:
1 Connect the CPU cooling fan cable to CPU_FAN.
2 Connect the system cooling fan connector to SYS_FAN.
3 Connect the case switches and indicator LEDs to the F_PANEL1.
4 Connect the standard power supply connector to ATX1.
5 Connect the auxiliary case power supply connector to ATX12V1.
6 Connect the case speaker cable to SPK1.
Connecting 24-pin power cable
The ATX 24-pin connector allows you to connect to ATX v2.x power supply.
24-pin power cable
Connecting 4-pin power cable
The ATX12V1 power connector is used to provide power to the CPU.
4-pin power cable
Installing the Motherboard
With ATX v2.x power supply, users please note
that when installing 24-pin power cable, the
latches of power cable and the ATX1 match per-
fectly.
When installing 4-pin power cable, the latches of
power cable and the ATX12V1 match perfectly.
23