Pci/Pnp Setup; Pc Health Status - ECS G31T-M9 Manual

PCI/PnP Setup

This page sets up some parameters for devices installed on the PCI bus and those
utilizing the system plug and play capability.
CMOS Setup Utility - Copyright (C) 1985-2005, American Megatrends, Inc.
Init Display First
Allocate IRQ to PCI VGA
: Move Enter : Select
F1:General Help
Init Display First (PCI)
Use this item to select which graphics controller to use as the primary boot devices.
Allocate IRQ to PCI VGA (Yes)
If this item is enabled, an IRQ will be assigned to the PCI VGA graphics system. You
set this value to No to free up an IRQ.
Press <Esc> to return to the main menu setting page.

PC Health Status

On motherboards support hardware monitoring, this item lets you monitor the
parameters for critical voltages, temperatures and fan speeds.
CMOS Setup Utility - Copyright (C) 1985-2005, American Megatrends, Inc.
Hardware Health Event Monitoring
Smart Fan Function
Shutdown Temperature
CPU Temperature
CPU Fan Speed
CPU Vcore
VDIMM
: Move
F1: General Help
PCI/PnP Setup
PCI
Yes
Select which graphics
controller to use as
the primary boot
device.
+/-/: Value F10: Save ESC: Exit
F9: Load Default Settings
PC Health Status
Press Enter
Disabled
: 42°C/107°F
: 4470 RPM
: 1.296 V
: 1.840 V
Enter : Select +/-/: Value
F10: Save ESC: Exit
F9: Load Default Settings
Using BIOS
37
Help Item
Help Item