Load Default Settings; Supervisor Password - ECS G31T-M9 Manual

40

Load Default Settings

This option opens a dialog box that lets you install stability-oriented defaults for
all appropriate items in the Setup Utility. Select <OK> and then press <Enter> to
install the defaults. Select <Cancel> and then press <Enter> to not install the
defaults.

Supervisor Password

This page helps you install or change a password.
CMOS Setup Utility - Copyright (C) 1985-2005, American Megatrends, Inc.
Supervisor
Change Supervisor Password
Supervisor Password (Not Installed)
This item indicates whether a supervisor password has been set. If the password has
been installed, Installed displays. If not, Not Installed displays.
Change Supervisor Password (Press Enter)
You can select this option and press <Enter> to access the sub menu. You can use the
sub menu to change the supervisor password.
Press <Esc> to return to the main menu setting page.
Supervisor Password
Password : Not Installed
Press Enter
: Move Enter : Select
+/-/: Value
F1: General Help F9: Load Default Settings
Using BIOS
Help Item
Install or Change the
password.
F10: Save ESC: Exit