Onboard LAN (optional)
The onboard LAN controller provides either of the following features:
•
Supports 10/100 Mbps Ethernet Transceiver
•
Fully compliant with IEEE802.3, IEEE802.3u, IEEE802.3ab
•
Wake-On-LAN (WOL) by Magic Packet/Frame/Link Change
•
Integrated PHY for 10/100/1000 Mbps
•
IEEE 802.3x compliant flow control support
•
Three power supplies: 2.5V, 1.8V and 1.2V
•
PCI Express base 1.1 compliant
Audio
This motherboard may support either of the following Audio chipsets:
•
5.1 Channel High Definition Audio Codec
•
Exceeds Microsoft Windows Logo Program (WLP) Requirements
•
ADCs support 44.1K/48K/96K/192KHz sample rate
•
Power Support: Digital: 3.3V; Analog: 5.0V
Expansion Options
The motherboard comes with the following expansion options:
•
One PCI Express slot for Graphic Interface
•
One PCI Express x1 Slot
•
One 32-bit PCI v2.3 compliant slot
•
One IDE connector that supports two IDE devices
•
Two 7-pin SATA connectors
Integrated I/O
The motherboard has a full set of I/O ports and connectors:
•
Two PS/2 ports for mouse and keyboard
•
One VGA port
•
Four USB ports
•
One LAN port
•
Audio jacks for microphone, line-in and line-out
BIOS Firmware
This motherboard uses AMI BIOS that enables users to configure many system
features including the following:
•
Power management
•
Wake-up alarms
•
CPU parameters
•
CPU and memory timing
The firmware can also be used to set parameters for different processor clock
speeds.
1.Some hardware specifications and software items are subject to change
without prior notice.
2.Due to chipset limitation, we recommend that motherboard be oper-
ated in the ambiance between 0 and 50°C.
Introducing the Motherboard
3