Checking Jumper Settings; Jumper Settings - ECS G31T-M9 Manual

Checking Jumper Settings

The following illustration shows the location of the motherboard jumpers. Pin 1 is
labeled.

Jumper Settings

Jumper
Type
Description
CLR_CMOS 3-pin
Clear CMOS
Rear USB PS/2
Power Select
3-pin
KBMPWR
Jumper (for
PS/2 S3 wake-
up only)
1. To avoid the system instability after clearing CMOS, we recommend
users to enter the main BIOS setting page to "Load Default Settings"
and then "Save Changes and Exit".
2. Make sure the power supply provides enough 5VSB voltage before
selecting the 5VSB function.
3. It is required that users place the KBMPWR cap onto 2-3 pin rather
than 1-2 pin as default if you want to wake up the computer by USB/PS2
KB/Mouse.
Installing the Motherboard
Setting (default)
1-2: NORMAL
2-3: CLEAR
Before clearing the
CLR_CMOS
CMOS, make sure to
turn off the system.
1
1-2: VCC
KBMPWR
2-3: 5VSB
9
1