Pci/Pnp Setup - ECS A790GXM-A Manual

40
Resume By PS2 KB (S3) (Disabled)
This item enables or disables you to allow keyboard activity to awaken the system
from power saving mode.
Resume By PS2 MS (S3) (Disabled)
This item enables or disables you to allow mouse activity to awaken the system from
power saving mode.
Resume on RTC Alarm (Disabled)
The system can be turned off with a software command. If you enable this item, the
system can automatically resume at a fixed time based on the system's RTC (realtime
clock). Use the items below this one to set the date and time of the wake-up alarm.
You must use an ATX power supply in order to use this feature.
Press <Esc> to return to the main menu setting page.

PCI/PnP Setup

This page sets up some parameters for devices installed on the PCI bus and those
utilizing the system plug and play capability.
CMOS Setup Utility - Copyright (C) 1985-2005, American Megatrends, Inc.
Allocate IRQ to PCI VGA
Allocate IRQ to PCI VGA (Yes)
If this item is enable, an IRQ will be assigned to the PCI VGA graphics system. You set
this value to No to free up an IRQ.
Press <Esc> to return to the main menu setting page.
PCI/PnP Setup
Yes
: Move Enter : Select +/-/: Value
F1:General Help F9: Optimized Defaults
Using BIOS
Help Item
YES: Assigns IRQ to
PCI VGA card if card
requests IRQ.
NO: Does not assign
IRQ to PCI VGA card
even if card requests
an IRQ.
F10: Save ESC: Exit