Advertisement
Available languages
Available languages
TROOBL HOOTING
Most cooking
problems
often are caused
by little things
you can find and fix without
tools
of any
kind. Check
the lists below
and on the next page before
calling
for assistance
or service,
if you
still need help, see "Requesting
Assistance
or Service"
on page 36.
PROBLEM
CAUSE
Nothing works
• The range is not plugged into a properly grounded outlet (120v polarized).
• The range is not properly connected to the gas supply. Contact a
designated service technician to reconnect the range to the gas supply. (See
the Installation Instructions.)
• You have blown a household fuse or tripped a circuit breaker.
PROBLEM
CAUSE
The oven does not work
• When using the oven for the first time, it is necessary to light the surface
burners first to purge the gas lines.
• You have not set the control knob correctly. Refer to "Using Your Range"
section.
• The main or regulator gas shutoff valve is in the off position. (See the
Installation Instructions.)
Burner makes muffled
• This is normal. This sound occurs when the oven burner cycles on and off
ticking noise when in use
to insure proper oven temperature.
The burner fails to light
• The ignition system is broken. Contact a designated service technician to
replace it.
• You have blown a household fuse or tripped a circuit breaker.
The burner flames lift
• The air/gas mixture is incorrect. Contact a designated service technician to
away from the ports, are
check the air/gas mixture or see the Installation Instructions.
yellow, or are noisy
PROBLEM
CAUSE
The burner fails to light
• The control knob is not set correctly. Push in the control knobs before turning
them. Make sure the control knob is turned to the LIGHT position. (See page 6.)
• You have blown a household fuse or tripped a circuit breaker.
• The burner ports may be clogged. Clean them with a straight pin. (See page 31 .)
The burner flames are
• The burner ports may be clogged. Clean them with a straight pin. (See page 31 .)
uneven
• The burner caps may not be positioned properly. (See page 31 .)
The burner flames lift off
• The burner needs cleaning. (See page 30 and 31 .)
the ports, are yellow, or
• The air/gas mixture is incorrect. Contact a designated service technician to
are noisy when turned off
check the air/gas mixture or see the Installation Instructions.
The burner makes a
• The burner is wet from washing. Let it dry.
popping noise when on
34
Advertisement
