Table of Contents
Advertisement
SAW CHAIN
TENSION
ADJUSTMENT
Continued
FILLING
OIL TANK
O97O17
Figure 6- Turning Adjusting Screw
Correct Tension
Incorrect Tension
Figure 7 - Saw Chain Adjustment
1. Remove oil cap.
2. Fill oil tank with SAE #30 motor oil. Note:For temperaturesbelow 30°F, use
SAE #10 oil. For temperatures above 75°1, use SAE #40 oil.
3. Replace oil cap at once. Tighten oil cap firmly for good seal. This will avoid oil
seepage from tank.
_,
4. Wipe off excess oil.
Note:It is normal for oil to seep when saw is not in use. Empty oil tank after each
use to prevent seepage.
_q
Hide quick links:
Advertisement
Table of Contents
