Page 1
® 8' ELECTRIC TELESCOPING POLE OWNER’S MANUAL MODELS RPS 96: 104317, 106821 IMPORTANT: Read and understand this manual before assembling or operating this chain saw. Improper use of saw can cause severe injury. Keep this manual for future reference. ® LISTED...
8. Wear snug-fitting clothes when operating Pole INTRODUCTION Saw or chain saw. Do not wear loose clothing or Your Remington Telescoping Pole Saw is a dual pur- jewelry. They can get caught in moving saw pose product. The electric chain saw is a separate chain.
Page 3
KICKBACK IMPORTANT SAFETY INFORMATION WARNING: Kickback may occur when Continued the nose or tip of the guide bar touches an object, or when the wood closes in 12. Do not force chain saw while cutting. Apply light and pinches the saw chain in the cut. Tip pressure.
IMPORTANT SAFETY INFORMATION Continued MAINTENANCE AND STORAGE OF POLE SAW Unplug Pole Saw from power source and follow maintenance and storage procedures outlined in the Maintenance and Storage section of your chain saw manual. Keep other persons away from cutting end of polesaw and at a safe distance from work area.
Page 5
FIGURES Saw Chain Hand Guard Oil Cap Power Cord Guide Bar Coupling Nut Trigger Switch Lock-out Handle Bracket Outer Pole Tighten Inner Pole Grip Area Loosen Trigger Switch Power Cord Figure 1 - Pole Saw Product Identification Guide Bar Nuts Towards Guide Bar Nose Cutting Edge Guide Bar...
Page 6
FIGURES Grip Area Bracket Figure 9 - Designated Grip Areas Trigger Support Figure 5 - Bracket with Trigger Support Trigger Switch Lock-out Trigger Switch Figure 6 - Assembly of Pole Saw Brackets Figure 10 - Pole Saw Handle with Trigger Switch Lock-out Chain Saw Power Cord 2nd Cut - Pruning Cut (to avoid pinching)
ADJUSTING POLE LENGTH ASSEMBLY The Remington Pole Saw has a telescoping pole as- Continued sembly that will extend from 57 inches (fully re- ASSEMBLY OF POLE SAW tracted) to 96 inches (fully extended). A threaded 1. Slip handle bracket over chain saw handle from compression coupling is used to hold the pole in the right side (see Figure 5).
When contacting DESA Specialty Products™, have OPERATING CHAIN SAW ready Continued • Your Name • Your Address TRIMMING A TREE (PRUNING) • Your Phone Number • Model Number of Product WARNING: Avoid kickback. Kick- • Date of Purchase (Include copy of receipt for back can result in severe injury or death.
WARRANTY INFORMATION Model ___________________________ Date Purchased ___________________ ELECTRIC POLE SAW LIMITED WARRANTY Always specify model and serial numbers when writing the factory. We reserve the right to amend these specifications at any time without notice. The only warranty applicable is our standard written warranty.