Remington 104316-01 Owner's Manual page 3

REMIN N
8' ELECTRIC TELESCOPING POLE SAW
PRODUCT
IDENTIFICATION
HandGuard
\
Saw Chain
Gr_ Area
Power
Cor_
Coupling _.
Nut
Inner Pole
Guide Bar
Handle Bracket
Outer Pole
Tdgger
Switch
Lock-out
_Power Cord
Figure 1 -Pole Saw Product Identification
POLE SAW NAMES
AND TERMS
Coupling Nut Thieaded collar (loosento
slide inner pole, dghtea to hold pole in
position).
Guide Bar Metal bar that extends from
saw body. The guide bar supports and guide*
chain.
Inner Pole The moveable section of rob-
ing m which the saw is attached.
Kickback Quick backward and upward
motion of guide bar. Kickback may occur
when tip of guide bar touches an object
wkile chain is moving. The guide bar will
kick up and back towards operator.
Oiler Control System for oiling guidebar
and chain.
Outer Pole Retains the moveable inner
pole.
Saw Chain (Chain) Loop ofchef.ring
cutting teeth for cutting wood. The motor
ddve.sChain.The guidebar supports chain.
Sprocket Toothed wheel that drives chain.
Switch Device thatcompletes orinterrupts
electrical circuit to motor of saw.
Switch Lockout Devine that reduces
accidentalstartingof saw.
Trigger Device that turns saw on and off.
Squeezing trigger turns saw on.
Releasing trigger turns saw off.
Trimming (Pruning) Processof cutting
limb(s) from a living tree.
Undercut An upward cut fzom underside
of log or limb. This is done while in normal
cutting position and cutting with top of
guide bar.