Back Panel - ProScan PS52690 User Manual

BACK PANEL
INPUT 1
Lets you connect a video component such as a VCR, DSS® receiver, or
laserdisc player.
L/MONO Provides left audio connection. Or, if you are connecting a
mono component, use the L/MONO input. The left audio connector is
usually white.
RIGHT Provides right audio connection. The right audio connector is
usually red.
VIDEO Provides video connection. The video connector is
usually yellow.
S-VIDEO Lets you connect a component with S-Video capability, such
as a DSS® receiver or S-VHS VCR. When using S-Video, make sure to
connect the three audio/video cables, as well as the S-Video
connector.
S-VEIE0
UMON0 RIGHT VIDEO
UMONO RIGHT VIDEO
INPUT2 _
glGNT VIDEO S-VIDE0
INPUT 2
Provides connection to a second video component such as a VCR,
DSS® receiver, or laserdisc player. Its jacks are the same as described
for INPUT 1, above.
INPUT 3
Provides connection to a third video component such as a VCR or
laserdisc player.
L/MONO Provides left audio connection. Or, if you are connecting a
mono component, use the L/MONO input. The left audio connector is
usually white.
RIGHT Provides right audio connection. The right audio connector is
usually red.
"DEO Provides video connection. The video connector is usually
, =llow.
You can use the ANT B input for
video games and switch between the
two inputs using the ANTENNA
button on the remote,
When using TV games, computers
and similar products with yourTV,
keep the contrast at a low setting. If
a fixed (non-moving) pattern is left
on the screen for long periods of
time at a high contrast setting, the
image can be permanently
imprinted onto the picture tubes.
These types of imprints are not
covered by your warranty because
they are the result of misuse.
36