Tv, (2) Vcrs, And Dss Receiver (Connection I) - RCA F32730 Owner's Manual

TV, (2)VCRS, AND DSS RECEIVER
(CONNECTION I)
This information applies to Connection I in theeConnections
Foldout.
Connection I provides:
• stereo sound from broadcast programs -
• stereo Sound from VCR
• Picture in Picture (PIP)
• Watch one channel on TV while recording another
channel
J
To usethis Connection you must have:
• (5) coaxial cable
J• (9) audio/video cables
• (1) S-Video cable (optional)
To connect:
1. Connect cables as shown in Connection I.
2. Return to First Things First, then follow the steps in the
Interactive Setup.
USING CONNECTION I
To watch TV programs:
1. Turn VCR and DSS receNer and laserdisc player off.
2. Press TV and tune to a channel.
To watch DSS programming:
1. Press DSS.CABLE and tune to a channel.
o ÷
To record from one VCR to the other (tape dubbing):
1. Turn DSS•receiver off.
2. Insert original tape into VCR2.
3. •Insert blank tape into VCR1.
;4. PressVCR1.
5. Set VCR to line input (for more, see your VCR User
Manual).
6. Press RECORD to begin recording.
7. Press V(_R2°LD, then press PLAY.
i I" • I
CABLEBOX
DSS
RECEIVER
VCRI
VCR2
W
• , , .
., /,
I ' i
0 R_ANTENNA 6ATELLI"i'_ DISH
I I
See Connections Foldout,
Connection I
i
66