RCA F32730 Owner's Manual page 75

Blank screen
• Maybe the device connected to the input jacks is not turned i
on.
• Try another channel.
• Press RESET, in case the picture controls are set too low.
No sound, picture okay
• Maybe sound is muted. Try pressing volume Up button to
restore sound.
• Maybe TV's speakers are turned off. Check Speakers On/Off
function.
olf using an S-VHS component, remember to also connect the
component's L and R AUDIO OUT jacks to the TV°s L and R
INPUT 1 jacks.
• Maybe SPEAKER switch on the back of the TV is not in the
INTERNAL position.
Can't select certain channel
• If using a VCR, check to make sure the_ TV/VCR switch on the
VCR is in the correct position.
Noisy stereo reception
• May be a weak station. Use EXPAND button to change to
-mono mode instead of stereo.
No picture, no sound but power light is on
• Maybe someone changed cable/air function to wrong
position.
• Maybe a vacant channel is tuned.
• If watching VCR (connected onlythrough antenna input),
make sure TV is tuned to channel 3 or 4- same as CH3/4
switch on VCR. Also check to make sure TV/VCR switch on
VCR is in correct position.
Sound okay, picture poor
• Check antenna connections.
• Try adjusting sharpness function to improve weak signals.
Black Box appears on the screen:
• Captioning may be turned on. Check the Closed-Caption
Display control panel in the Channel Menu.
73