Set The Vcr1 Channel - RCA F32730 Owner's Manual

h_" _ *., _!_ _*
SETTHE VCRI CHANNEL
The fourth step lets you set the VCR1 channel. When you set
the VCR1 channel, you're telling the TV what channel to tune
to when you press the VCR1 button on the remote.
For example, if you have a VCR connected to the Video 1
input jacks on the back of the TV, you want the TV to tune to
the Video 1 input channel when you press the VCR1 button.
If you don't have a VCR1 component connected to the TV, skip
this step or select Not Connected from VCR1 Channel choice
list. (For more, see Auto Tuning, page 45.)
1. Press MENU to bring up the VCR 1 choice list.
,
,
Point to the choice that matches'the way youhave you_
VCR connected to the TV.
If you used the Connections Foldout to hook up your TV,
use the table shown at the right to select the VCR1
channel.
Press MENU to continue.
• /- .. : . j
If you used
Connection A
Connection B
Connection C
Connection D
Connection E
Connection F
Connection G
Connection H
Connection I
i I
Select
Video I Input
Video I Input
Video I Input
Video I Input
Not Connected
Not Connected
Video 2 Input
Ch3 Antenna A*
Video 2 Input
ii
* Or Ch4 Antenna A, depending on •how
yourVCR's 3/4 switch is set.
r
19