Connection: Tv + Vcr + Satellite Receiver - RCA F27669TX71AA14 User Manual

C@nnect @ns Setup
Connection: TV + VCR + Satellite Receiver
1. Connect your Satellite Receiver to your "IV
A. Connect the audio/video cables. Connect the audio cables (white and red) to the AUDIO
IN jacks on the back of the TV (t{ and L/MONO) and to the Audio Output Jacks on the
Satellite P, e ceiver.
B. Connect the vide() cable (yellow) to the VIDEO IN jack on the back of the TV and to the
Video Output Jack on the satellite receiver.
C. Connect S-Video cable (optional). Connect an S-Video cable to the S-VIDEO jack on the
TV and to the S-VIDEO jack on the satellite receiver, (An S-Video cable provides belier
picture qualily than a regular video cable, but it is optionaL)
2. Connect coaxial cables to the Satellite Receiver
A. Connect the coaxial cable t_cnmyour cable outlet, cable box, or antenna to the Input Jack
on your satellite receiver (sometimes labeled IN FROM ANT).
I3. Connect the coaxial cable t_nm your satellite dish antenna to the Input Jack on your
satellite receiver (sometimes labeled SATELLITE IN).
3. Connect the Satellite Receiver to the VCR and to the TV
A. Connect a coaxial cable to the Output Jack (sometimes labeled OUT TO TV) on the
satellite receiver and to the Input Jack on the VCR (sometimes labeled IN FROM ANT),
B. Connect a coaxial cable to/he Output Jack on the VCR (sometimes labeled OUT TO
TV)
and to the CABLE/ANTENNA jack on the TV.
4. Connect G-LINK cable
A. If you haven't done so, remove the Demo Pin tknm the G-LINK jack,
I3. Connect the G-LINK cable to the G-LINK jack on the TV. Next slop, place one of the
wands of the G-LINK cable to work with your VCR (instructions are on p. 13).
Go to page 13
Chapter I 11