TV, (2) VCRS, AND
DSS ® RECEIVER
(CONNECTION
I)
This information
applies to Connection
I in the
Connections Foldout.
Connection
I provides:
•
Stereo sound from broadcast programs
•
Stereo sound from VCR
•
Picture in Picture (PIP)
•
Watch one channel on TV while •recording another channel
To use this connection
you must have:
•
(5) coaxial cables
•
(9) audio/video
cables
•
(2) S-Video cables (optional)
To connect:
1.
Connect cables as shown in Connection
I.
2.
Return to First Things First, then foilow the steps in the
Interactive
Setup,
USING
CONNECTION
I
To watch
"IV programs:
1. Turn VCR and DSSe receiver and laserdisc player off.
2.
Press TV and tune to a channel.
To watch
DSS e programming:
1.
Press DSSeCABLE and tuneto
a channel.
To record from
one VCR to the other
(tape
dubbing)
._
1.
TurnDSS ® receiver off.
2.
Insert original tape into VCR2. "
3. Insert blank tape into VCR1.
4.
Press VCR1.
5.
Set VCR tO line input (for more, seeyour VCR User Manual).
6, • Press RECORD to beginrecording-
.
7.
Press VCR2eLD, then press PLAY.
8. If
you want to watchla
different
channel, set the TVNCR
switch on both VCRs to TV; press TV; then tune toa channel.
•
" :I
See Connections
Foldout,
Connection
I
66