Table of Contents
Advertisement
Connections
& Setup
Connection: TV + VCR + Satellite Receiver
1.
Connect
your Satellite
Receiver
to your TV
A. Connect
the audio/video
cables.
Connect
the audio
cables
(white
and red)
to the
AUDIO
IN jacks
on the back of the TV (R and L) and
m the Audio
Output
Jacks
on the
Satellite
Receivm:
B. Connect
the video cable
(yellow)
to the VIDEO
IN jack
on the back of the TV and
to the
Video
Output
Jack
on the satellite
receivm_
2.
Connect
coaxial
cables
to the Satellite
Receiver
A. Connect
the coaxial
cable li'om your cable outlet,
cable box, or antenna
to the Input
,lack
on your satellite
receiver
(sometimes
labeled
IN FROM
ANT).
g. Connect
the coaxial
cable fi'om your satellite
dish antenna
to the Input Jack
on your
sar_,llit_, receiver
(sometimes
labeled
SATELLITE
IN).
3.
Connect
the Satellite
Receiver
to the VCR and to the TV
A. Connect
a coaxial
cable to the Output
lack
(sometimes
labeled
OUT
TO TV) on the
satellite
receiver
and
to the Input Jack on the VCR (sometimes
labeled
IN FROM ANT).
B. Connect
a coaxial
cable to the Output
Jack
on the VCR (sometimes
labeled
OUT
TO
TV) and to the C&BLE/ANTENNAjack
on the TV.
4.
Connect
G-LINK cable
A. If you haven't
done
so, remove
the Demo
Pin li'om the G-LINK jack.
B. Connect
the G-LINK
cable to the G-LINK jack
on the TV. Next
step, place one of the
wands
of the G-LINK
cable
m work with your VCR (instructions
are on p. 13).
Go to page 13
Chap_erl
11
Advertisement
Table of Contents
