Table of Contents
Advertisement
ADVANCED
CONNECTIONS
Advanced
connections
give you better sound and video by separating
the audio and video signals and enabling
you to connect multiple
components.
This section describes the types of inputs available
on the back of your
TV and suggests ways you can use them for optimum
performance.
BACK OFTHETV
Once you have made your connections,
you will need to program the TV to tune
to the correct Video Input channel in
order to see and hear audio and video
from a component such as a VCR or DVD
player. You will program this later in the
Interactive Setup.
k
The diagram
below describes each of the back panel jacks. When
connecting
A/V cables, be sure to connect corresponding
OUTPUTS and
INPUTS (Video to Video, Right Audio to Right Audio, etc.).
VIDEO and Audio Inputs
|
J
Connect any one of thefollowing
components:
VCR
Internet
Access Device
• Laserdisc Player
• DVD Player
• Satellite
Receiver
To view the component
connected to VIDEO,
use the WHO,INPUT
button
on the remote,
\
_
VID[O
[o
VCR
CONTROL
Audio Outputs
Connect to an audio receiver or
amplifier
for variable controlled
or fixed level stereo output.
/
our
CABLE/
S._DEO
O
ANTENNA
VCR Control
Connect the GUIDE Plus+
Gold system IR controller
for one-button
recording
and channel tuning
from
the GUIDE Plus+ Gold
system.
T /
S-Video
This optional
connection
can
be used for
better video
quality
picture.
I
CablelAntenna
Takes the signal input from a cable,
cable box, or an off-air
antenna.
Can als(
be used for basic component
connections.
6
Advertisement
Table of Contents
