Table of Contents
Advertisement
REMOTE
BUTTONS
ON-OFF When in TV mode, turns TV on and off. If in another
device
mode (VCR, DVD, Satellite, etc.) and programmed,
will turn the device
on and off. When pressed twice within
two seconds, all devices that are
on will be turned off (this feature only works with most RCA,
PROSCAN
and GE products).
VCR1
Puts the remote in VCR mode and if auto tuning
is enabled,
it will
turn on the TV and tune to the correct channel.
TV Turns on the TV and puts the remote in TV mode. Also displays
channel information.
DVD Puts the remote in DVD mode and if Auto Tuning is enabled, it will
turn on the TV and tune to the correct channel.
VCR2
Puts the remote in VCR2 mode and if Auto Tuning is enabled,
it
will turn on the TV and tune to the correct channel.
AUX
When pressed, will turn on the component
you have programmed
it to control.
Also turns on the TV if Auto Tuning is enabled
and remote
is programmed
to control a TV.
SAT-CABLE
Puts the remote in SAT.CABLE mode and if Auto Tuning is
enabled,
it will turn on the TV and tune to the correct channel.
MUTE
Reduces the TV's volume to its minimum
level. Press again to
restore the volume.
SKIP
Press once before changing
channels and the TV will wait 30
seconds before returning
you to the original
channel.
Press repeatedly
to add more time.
CH ^ or CH v Scans up or down through
the current channel list. Press
once to change the channel up or down;
press and hold to continue
changing
channels.
VOL< or VOL>
Decreases or increases the TV's volume.
SOUND
Press once to display the audio processor choice list. Point and
select to choose a different
processor or press CLEAR to exit.
LIGHT ICON
Press to illuminate
the remote's
buttons.
The light
automatically
shuts off within
a few seconds of the last button
press.
GO BACK
Returns you to the previous channel.
GUIDE
Brings up and exits the GUIDE Plus+ Gold system. In SAT.CABLE
mode, brings up available
on-screen guides.
INFO Brings up channel information.
MOVE (Arrows)
Used to point to different
items in the menu system.
Also used to adjust the menu controls.
Also move the PIP window
when
no menus are on the screen.
OK When in the menu system, selects highlighted
items or returns you
to the previous menu.
LED
VCRI
TV
<1
DVD
VCR2
AUX
SAT.CABL[
&&°& &
MUTE
SKIP
SOUND
G0 BACK
GUIDE
INFO
MENU
CLEAR
,@ 0@,@
ANTENNA
REVERSE
PLAY
FORWARD
REC'VCR÷
STOP
PAUSE
PiP
SWAP
CHCTRL
RESET
©O©O
22
Advertisement
Table of Contents
