Table of Contents
Advertisement
Then use the Editor Menu Action Buttons as described in the next section.
Editor Menu Action Buttons
While browsing
the Editor menu, the following
Action
buttons are
available
on the bar:
Cancel
Press 1 on the remote to cancel any changes made since
entering
the Editor Menu,
Change
Press 2 on the remote to change the channel number
for
the highlighted
channel line.
On/Off
Press 3 on the remote to toggle the state of the channel
between
On and Off.
EXPANDED
INFORMATION
To view more information
about a program,
advertisement
or special,
highlight
the channel listing or ad/show information
box and press the
INFO button.
Requesting
more information
about a particular
show will
also display the PlusCode programming
number and the Shows on Next for
that channel.
Pressing INFO while highlighting
an ad panel will fill the screen with any
additional
and/or promotional
information
regarding
that particular
program.
Pressing the INFO button
again exits the expanded
information
screen.
TROUBLESHOOTI
NG
Troubles sometimes are caused by simple "faults"
that you can correct
without
a service technician.
Here are a few basic remedies:
Program
information
does not download
Review your setup information
and make sure it is correct.
The TV must be off to download
information.
Leave your TV off
overnight,
for at least 10 hours, to receive a download
for your area.
If you are using a cable box, make sure the cable box is on in order to
receive program
information.
Scheduled
Watch or Record does not occur
Check Schedule for timer conflicts.
Check that IR controllers
are attached securely and directly over the
remote sensor.
Leave your VCR off to record programs.
Make sure there is a tape in the VCR and that the VCR is properly
connected.
Ad/Show
Information
44
Advertisement
Table of Contents
