Table of Contents
Advertisement
GRID
GUIDE
The Grid Guide appears each time you enter the GUIDE Plus+ Gold menu
system. It displays the current
programming
for each channel, The live
program
is displayed in the video window,
Use the up and down arrows to browse channel listings and
CH ^Iv to page through.
Use the right and left arrows to browse
future
program
listings.
To tune to a channel, highlight
the program you want to view in the
channel listing and press OK. Press CLEAR to exit the GUIDE Plus+
Gold system and return to the original
channel. Press GUIDE to exit
the GUIDE Plus+ Gold system and tune to the channel in the view
window.
GUIDE Plus+ Gold screens illustrated
in
this book are representations
of what
you are likely to see. Not all channels,
programs, and GUIDE Plus+ Gold
information depicted will be available in
your area.
New features
and options can be
downloaded
to the GUIDE Plus+ Gold
system, so these too are subject to
_,change.
Grid Guide
Action Buttons
I
Grid Guide Action Buttons
Action
buttons will change according to where you are in the GUIDE
Plus+ Gold system. Be sure to look at the action bar before pressing the
command
numbers.
When highlighting
the Channel listings, the following
Action
buttons
are available
on the bar:
Grid Guide
Menu
Selection
Watch
Press 1 on the remote to place a timer in the Schedule for
the TV to turn on and tune to the program
highlighted
in the
Channel listing. When the TV turns on, the GUIDE Plus+ Gold system
will automatically
appear with the scheduled
program
highlighted
and tuned in the View window.
Go To Press 2 on the remote to bring up the direct dial box and
enter the number of the channel you want. This will highlight
the
channel and current program
in the channel listing of the Grid
Guide. Press OK to tune to the highlighted
channel. If the view
window
is unlocked,
you can press GUIDE to tune to the channel.
Record
Press 3 on the remote to place a timer in the Schedule for
the VCR to record the program
highlighted
in the Channel listing. If
you have a cable box, changing
channels on the TV will not cause
the cable box channel to change while recording.
The Program information
window
will display a confirmation
when you
have successfully created a timer to watch or record. If you have selected
two programs to watch or record which begin at the same time or
overlap,
you will receive a timer conflict
message. The GUIDE Plus+ Gold
system will not schedule a conflicting
timer, therefore
you must choose
Action
Button
command
numbers
&&°& &
0
©
O©OO
40
Advertisement
Table of Contents
