Table of Contents
Advertisement
ADVANCED
CONNECTIONS
Advanced
connections
give you better
sound and video by separating
the audio and video signals and enabling
you to connect multiple
components.
This section describes the types of inputs available
on the back of your
TV and suggests ways you can use them for optimum
performance.
Back of the TV
The diagram
below describes each of the back panel jacks. When
connecting
AN cables, be sure to connect corresponding
OUTPUTS and
INPUTS (Video to Video, Right Audio to Right Audio, etc.).
Once you have made your connections,
you will need to program the TV to tune
to the correct video input channel in
order to see and hear audio and video
from a component such as a VCR or DVD
player. You will program this later in the
Interactive Setup.
f
VIDEO and Audio Inputs
Connect any one of the following
components:
• VCR
• Internet
Access Device
• Laserdisc Player
• DVD Player
• Satellite
Receiver
To view the component
connected
to VIDEO,
use the WHO.INPUT
button
on the remote.
I
* Audio Outputs
Connect to an audio receiver or
amplifier
for variable controlled
or fixed level stereo output.
vio I
CABLE/
G-LINK
s Eo
A.,ENN
G-LINK
T
Connect the G-LINK cabh
for one-button
recordinc
and channel tuning
from
the GUIDE Plus+ Gold
System,
/
* S-Video
This optional
connection
can
be used for
better video
quality
picture.
I
CablelAntenna
1
/Takes
the signal input from a cable,
I
|cable
box, or an off-air
antenna.
Can also|
Lbe
used for basic component
connectionsJ
* These jacks are not available
for models F19625 and F20625.
6
Advertisement
Table of Contents
