Mitsubishi HS-U780 Owner's Manual page 49

_ Channel 2
Day Monday 17
QS%ar_ _ime ll:30am
0 Szoe zime i: 3,0pm
@
Turn the ADJUST dial to set the recording speed (SP, EP:, or
auto recording speed (AUTO)). (See "auto speed program-
ming" on page 56 for an explanation of the auto speed record-
ing feature.) Turn the shuttle ring to the right.
CH DAY ON OFF
2 MOlT ll:30a I:30pSP
: : SP
: : SP
: : SP
Press MENU for Main
:Menu
DImportant:
E>Important:
O The contents of the programmed memory will appear on the
"recap" screen. The letter "S" will be displayed next to the
satellite channel.
O
To program additional recording times, select an empl;y
program line by turning the ADJUST dial. Then, turn the
shuttle ring to the right. You will return to the VCR Plus+
"Program to record" screen. Continue the programming
procedure from step 0.
®
When you are finished with all programming, turn the VCR
power OFF and make sure the prograramed recording light is
lit. However, if you have a cable box or a PRIMESTAR ®
receiver, leave the cable box or receiver turned ON. Addition-
ally, if the HS-U780 does not control your cable box, leave the
box tuned to the station you wish to record.
Only four of the eight program lines appear on-screen at any one
time. To see additional program lines, turn the ADJUST dial to
scroll the lines on the screen.
cancelling a recording in progress
There are two ways to cancel a recording in progress:
1. Press the STOP or PLAY/STOP button. The recording is
stopped, but the program is not cancelled. Therefore, if you
press REC_ the recording will start ag_dn.
2. Press the POWER button on the front panel. The recording is
stopped and the program is cancelled.
changing settingswhileprogramming
If you wish to change one of your settings (such as start time)
while you are programming, turn the shuttle ring on the remote
to select the setting you wish to change. Turning the ring right
will move you forward through the list, while turning the ring left
will move you backwards. Then, use the ADJUST dial to change
the setting.
If you turn the shuttle ring to the left while the channel number
is flashing, you will cancel the entire program.
49