Mitsubishi HS-U780 Owner's Manual page 29

:: -__A special noteto
cable box subscribers
O Firsl;
Time Set-Up
Your choices are:
OSet the clock
Addldelete channels
@Set VCR Plus+ Guides
Use ADJUST %0 selec%,
and
ENTER.
Press MENU for Main Menu
_Important:
_AllSet
Fully Automatic Settins
Clock
VCR Plus+ Guides
Channel memory
P;ess ENTER to continue.
MENU for
Set-Up Menu
If your local cable company scrambles some or all stations, and/or
requires you to use a cable box, then your ability to program
channels will be limited. ThE, cable box receives ai1 of your c.han-
neIs and then sends only one to your TV (and your VCR), usually
on channel 3 or 4.
If you are required to use a cable box, you should choose "Cable
box only" option in ',;tep _ on the next page and turn the cable
box on. Your HS-U780 _qll use its special Converter Box Control
technology to change the channels on the cable box.
If your cable box or cable system seems incompatible wil:h your
new VCR, call your cable company. They m_y be able to provide
solutions to your problems.
Beforeyou begin,you stlould:
• have completed all connections between your VCR, TV, cable,
antenna, cable box, and satellite receiver (if any); (pages 12-20)
• make sure to leave the cable box on (if you use a box); and
• know how to view the picture coming from your VCR.(page 25)
@
Make sure you are viewing the picture coming from your
VCR. Then, pre,;s the MENU button on the remote control.
You will see the "VCR Main Menu." Ma _e sure the words
"First Time Set-Up" is highlighted. If it is not, use the AD-
JUST dial on the remote control to highlight it.
Turn the shuttle ring on the remote control to the right. The
"First Time Set-Up" menu will appear. The "AllSet" ,,_ill be
highlighted. Turn the shuttle ring to the right.
If you are recording or playing back a tape, Lhe words "Not
available" will flash and an error message will appear. To correct
this, stop the tape.
O You will see the "AllSet" explanation ,_creen. Turn the shuttle
ring to the right.
_AllSet
Nhat type of sources are
connected _o the VCR?
[e]-__L_
(OFF)
O Cable
OC_ble box only
O Indoor/outdoor ant
Use ADJUST to select,
end ENTER. Press
MENU for Set-Up Menu
O
You will see the menu for automatically memorizing chan-
nels. If you are using a satellite receiver, turn the ADJUST
dial to select "Sat. receiver." Then use the shuttle ring to
select correct code for your satellite receiver. Select "1" if you
are using an RCA or GE satellite receiver; select "2" if you are
using a PRIMESTAR _ satellite receiw;r; and select "3" if you
are using a Sony satellite receiver. Now you can select all of
the channels coming from your satellke receiver.
If you are not using a satellite receiver, make sure "Sat.
..... OFF." rece,ver is set to
29