Selecting A Channel - Mitsubishi HS-U780 Owner's Manual

_Important:
Add/delete channels
Channel 39
Not in memory
Use ADJUST to select,
a channel. Use ENTER
to add it. CANCEL zo
deleze!!it. Press!!_:i_:i
MENU for Set,Up Menu
_Important:
_Important:
If you are recording or playing back a tape, or if you are watching
a channel from a satellite receiver, then the words "Not available"
will flash and you will see an error messalge. To correct this stop
the tape or switch the VCR to a local channel.
O
You will see the screen for adding or deleting channels. Use
the ADJUST dial to select the channel that you want to add
or delete. Press the ENTER button or turn the shuttle riag to
the right to add the channel; press the C,ANCEL button or
turn the shuttle ring to the left to delete it.
O
When you are finished adding or deleting channels, press the
MENU button once to return to the "First Time Set-Up"
menu; press the MENU button a second time to return to the
"VCR Main Menu"; press the MENU button a third time to
turn off the menu.
If you use 'memorize channels' from the AllSet
TM
menu again, you
will lose all of the manual changes you made. All of the clhannels
you deleted will be added; all of the channels you added will be
deleted. If you are using a cable box that receives only one or two
digit channels_ you cannot add a three-digit channel.
Selecting a channel
Now that you have programmed your channels, and added or
deleted some, you will want to be able to select channels. (If you
have not yet programmed channels using the AllSet feature, see
page 28.)
If you selected indoor!outdoor antenna, the VCR can receive UHF/
VHF channels 2-69. If you selected cable box only, the VCR can
receive cable box channels 0-99. If you selected cable am_enna,
the VCR can receive cable channels 1-125. i[fyou try to s:elect a
channel number that the VCR cannot receive, the VCR will not
change channels. If you are using a satellite receiver, you cannot
select cable channels 100-125.
Also, your VCR can ,;elect all of the channels of your Sony, RCA,
or PRIMESTAR ® satellite receiver. If you are using an RCA or a
Sony receiver, you can select channels 100-999. If you are using a
PRIMESTAR ® receiver, you can select 1-999 channels. If you
select a channel coming from an RCA or Sony receiver, your
receiver will automatically turn on.
There are two basic ways to select channels: sequentially or
directly.
selecting channels sequentially
Press the CHANNEL buttons on the remote control or turn tlhe
jog dial on the VCR f_ont panel. This will cycle through the
channels in sequential numerical order. If you have connecte,:l
your VCR to a satellite receiw_r, the lowest rnmbered satellite
35