Of Video Functions; Selecting And Adjusting The Audio And Video Functions - Mitsubishi HS-U780 Owner's Manual

Selecting andadjusting theaudioandvideofunctions
Below are instructions on how to select and. adjust the audio and
video functions.
Before you begin, you need to know:
• how to view the picture coming from your VCR (page 25).
O Press the AUDIO button on the remote control to see the
audio function menu, or press the VIDE() button on the
remote control to see the video function menu.
audio function menu video function menu
VCR
Listen to: STI;REO
Use ADJUST to ,._elect
VCR
REC sF, eed SP
Use ADJUST to select
Recording
dial
_Important:
Press the AUDIO or VIDEO button repeatedly until t]_e
function you want to adjust appears.
Turn the ADJUST dial on the remote to adjust the setting.
The functions will di,;appear if you do not press any buttons for 5
seconds.
The audio and video function menus do not appear when the VCR
menu is displayed; when plating a tape and :'Play PerfecTape _' is
set to "DUB"; or during special effects playback. The recording
speed (REC speed), recording format (REC format) and tape
functions do not appear during playback. The "Sharpness"
function only appears during playback when "Play Perfec]'ape" is
set to "NORMAL". The PerfecTape function is displayed only
when a tape with its erasure tab intact is loaded and the VCR is
stopped.
Your new VCR offers a wide variety of recording options that take
full advantage of our advanced electronics. This section tells you
about the following recording procedures:
• Recording a current broadcast,
• Programming your VCR to record,
• Programming with the VCR Plus+ ® system,
• Using Quick l:'rogram,
• Using One-Touch Recording (OTR),
• Using One Key Programming, and
• Notes about programmed recording.
45