Mitsubishi HS-U780 Owner's Manual page 10

Chapter1: Gettingto KnowYourVCR Fluorescent Display (cont)
®
Q
®
®
®
®
®
®
©
SAP indicator (SAP)
This will light up to indicate that the
channel you are watching has a Separate
Audio Program, or S.A.P. An S.A.P. is an
alternative soundtrack to the program you
are watching. The S.A.P. is often another
language.
stereo indicator (ST)
This lights up when the VCR is receiving a
stereo TV channel.
cable tuning light ( • )
This lights up when your VCR is receiving
cable broadcasts.
PerfecTape ®light (PT)
This will flash when the PerfecTape test is
in progress. It will stay illuminated when
the test is completed.
S-VHS indicator (S-VHS)
This will light up when you play or record
in Super-VHS (S-VHS).
tape speed lights (SP, EP)
This will light to indicate the tape speed
you are using when playing or recording.
"SP" indicates standard play; "EP" indi-
cates extended play.
VCR light (VCR)
This will light up when the VCR/TV
button is set to "VCR." It indicates that
the picture is controlled by the VCR.
programmed recording light (P7 [_)
This lights up when the VCR is off and
you have programmed the VCR to record.
peak level meters
This displays the audio level in decibels
for both the left (L) and right (R) channels.
@
@
®
@
counter/present time/remaining
display
This area displays: t;he current time; a
time counter showing how long the tape
has run; the amount; of time remaining on
the tape; or the contents of a programmed
recording when you are programming
your VCR.
The current time is displayed when the
VCR is turned offor when you press the
DISPLAY button. The counter is auto-
matically set to "0H00_00S" when a new
tape is loaded. The counter will display
"- H- - M - - S" when no tape is in the VCR.
channel display
This displays the cable, channel, broadcast
channel, or input you have selected. If you
set up your VCR to receive signals from a
satellite receiver, this area can display the
satellite channel you ace receiving.
lock light (LOCK)
This lights up when the "Child Lock"
feature is in use.
play and record light and cassette
status symbol
These light up when the VCR is playing a
tape or recording. The symbol ( [-"_J ) will
light up when a tape is in the VCR. The
dashes in the center of the symbol simu-
late the movement of the tape when
playing and recording.