Mitsubishi HS-U780 Owner's Manual page 37

Your choices
are:
_AllSet
r]_"[=_[ _1 Ik dlqT[r_E=_m _=][=-]
Add/delete channels
Set VCR Plus+ Guides
Use ADJUSTito_selec_,;,
and ENTER.
Press MENU for Main Menu
OSe_:%he clock
:,_:!
:i
(AUTO)
Use ADJUST to select,
and ENTER. Press
MENU for Set-Up Menu
_Important:
OSet %he clock =
(AUTO)
Time zone (AUTO)
Daylish% savinss(AUTO)
To activa%e Auto Clock.
turn off the VCR.
Use ADJUST _o select,
and ENTER. Press
MENU for Set-Up Menu
OSe_._he_clock , -....
Channel (065)
(Eastern )
ODaylish% savinss(AUTO)
To activate Auto Clock,
turn off the VCR.
Use ADJUST to select.
and ENTER. Press
MENU for Set-Up Menu
To use the auto clock function:
O Press the MENU button ,on the remote control. You _ll see
the "VCR Main :Menu."
O
Turn the ADJUST dial to select "First 25me Set-Upl Turn
the shuttle ring to the right. The "Fir,_t Yime Set-Up :*menu
will appear. Turn the ADJUST dial to select "Set the clock."
Turn the shuttle ring to the right.
You will see the "Set the clock" menu. The words "C:[ock set"
will be highlighted. Turn the ADJUST dial to select AUTO.
Turn the VCR off to activate the auto clock setting function.
The VCR will search for a channel that carries a time si_._al and
set your time zone and daylight saving time. If there are only a
few channels in your area that carry time signals, the se'Lting may
take about 30 minutes to complete. If you turn the VCR on before
the correct time displays, the auto clock setting will be canceled.
You can see if the clock has been set on the fluorescent display on
the VCR.
If the VCR displays the wrong time, the time zone setting may
not be correct. To adjust this setting, follow the directions in "If
the VCR displays the wrong time," below.
When you memorized channels, if you chose "Cable box only",
make sure that you leave the cable box on. At 3:00 AM, when the
VCR power is off, the VCR will begin to automatically change
channels on the cable box, one by one, to s_et the clock. At this
time you cannot use the cable box. If you want to use it, turn on
the VCR or set the "Clock set" of the "Set Lh._ clock" menu to
MANUAL. (In both cases, auto clock function will be canceled.)
When you memorized channels, if you chose "Cable" or "Indoor/
outdoor ant", the VC,R will set the clock as soon as you turn off
the VCR and also at 3:00 AM.
IftheVCRdisplays the wrongtime,
O Follow the procedure above up to step _}. Then, turn the
shuttle ring to the right.
O
You will see the auto clock setting menu. The word "Channel"
will be highlighted. If you know the channel that ca_-ies a
time signal, turn the ADJUST dial to enter the channel. Most
PBS stations broadcast a time signal. For the fastest re-
sponse, enter your local PBS station. If you don't know it,
leave the channel setting at AUTO. Turn the shuttle right.
The words "Time zone" will be highlig:hted. Turn the ADJUST
dial to select the time zone of your area. The available time
zones are: Atlan_:ic, Eastern, Central, Mountain, Pacific,
Alaska, and Hawaii. Then turn the shutLle ring to the right.
37