Servicing The Lenticular Screen And Fresnel Lens; Lenticular Screen And Fresnel Lens Removal; Pcb-2Hdw-2) - Mitsubishi Electric WT-46809 Service Manual

MODELS: MODELS: WT-46809 / WS-55809 / WS-55819 / WS-65809 / WS-65819

SERVICING THE LENTICULAR SCREEN AND FRESNEL LENS

CAUTION: Wear gloves when handling the Lenticular Screen and Fresnel Lens.
This prevents cuts and finger prints. Do not place Fresnel Lens in the sun.
This may cause fire and heat related injuries.
WT-46809 / WS-55809 / WS-65809
1a. Lenticular Screen and Fresnel Lens Removal
1. Remove the screen assembly shown in the Cabinet Disassembly procedure.
2. Remove the screws (a) securing the Screen Holder.
3. Slide the Lenticular Screen and Fresnel Lens from the Screen Frame.
Note: When separating the Lenticular Screen from the Fresnel Lens, use caution
while prying the Screen and Lens apart. Use a slot type screw drive, and
remove the pressure sensitive double sided tape.
Page 12