Mitsubishi VS-5041 Owner's Manual page 39

Projection TV + audio system
equipment you will need
To hook up an audio system, you will need:
• 1 set of RCA pin audio cables.
procedure
0
Connect the audio cables to the
AUDIO MONITOR OUTPUT
terminals on the back of the
Projection TV. Use the red cable
to connect the right (R) channel
and the white cable to connect
the left (L) channel.
Connect the other ends of these cables to the AUX IN terminals
on the back of the audio system.
O
Turn off the television's speakers. Tc do this, press the AUDIO
function button on the control panel or remote control until you
see the SPEAKER display. Set the speakers to "External" by
pressing the adjust (up/down) or right/left, buttons. See "Adjust-
ing the sound," page 66.
O Set the audio system's input to the AUX position.
_- White Lead
I_ Red Lead O
Audio System Rear Terminals
f AUX
Projection TV Rear Terminals
_--- White Lead
----_- Red Lead
\t.._!
',%_.°.__ L
@1
ACTIVE
NETWORK
,D
E
A
, U
D
O
EXT2 E_T _ --
_r_pU_
Basic Connections 39