Mitsubishi VS-5041 Owner's Manual page 28

ProjectionTV + cable with a decoder box
equipment you will need
Use this hook-up if you do not need a decoder box to de,';cramble
basic cable channels, but you need a decoder box to descramble
premium cable channels. This hook-up will allow you to use your
Projection TV's advanced channel changing features, such as super
quick view, while watching basic cable channels.
To complete the hook-up, you'll
need:
• 1 two-way splitter, and
3 lengths of 75-ohm coaxial
cables.
Procedure
O Connect the incoming cable to the IN terminal on the two-way
splitter.
0
0
Connect a coaxial cable to one of the OUT terminals on the
splitter; connect the other end of tt:ds cable to the ANT-A
terminal on the back of the Projection TV.
Connect the second coaxial cable to the second OUT terminal
on the splitter; connect the other end of this cable to the IN
terminal on the decoder box.
Connect the third coaxial cable to the OUT terminal on the
back of the decoder box, and the other end of this cable to the
ANT-B terminal on the back of the Projection TV.
28 Chapter 2: Connecting Your Projectio_ TV