Mitsubishi VS-5041 Owner's Manual page 37

Projection TV + home theater receiver
(A/V receiver)
equipment you will need
To hook up a home theater receiver, you will need:
• 1 set of RCA pin-type audio
cables,
2 RCA pin-type video cables (if
connecting a standard VCR), or
1 Super Video cable (S-VHS) and
1 RCA pin-type video cable for a
Super VHS home theater re-
ceiver.
Important:
procedure
(Please see the illustration on the next page.)
0
Connect one end of a video cable to the TV VIDEO INPUT
terminal of the home theater receiver. Connect the other end of
this cable to the VIDEO TUNER OUTPUT terminal on the
back of the Projection TV.
O
Connect one end of a video cable to the VIDEO OUTPUT
terminal of the home theater receiver. Connect the other end of
this cable to the EXT-1 VIDEO INPUT terminal on the back of
the Projection TV.
If you are connecting a Super VHS (S-VI-]S_ VCR, connect a Super
Video cable to the S-VIDEO OUTPUT terminal of the home theater
receiver. Connect the other end of this cable to the EXT-1
S-VIDEO INPUT terminal on the back of the Projection TV.
Basic Connections 37