Mitsubishi CS-31301 Owner's Manual page 74

Troubleshooting (cont.)
Problems Possible Solutions
For More Informatton
* The remote control doesn't work.
• Check that the batteries are
installed correctly.
' Check the TV/VCR/AUX
switch is set to TV.
See "Getting Ready to
Use the Remote Control" in
Chapter 1 for an explanation of
how to install batteries in the
remote control
See "Remote Control Buttons
and Functions" in Chapter 1,
which explains where the
TV/VCR/AUX switch is located.
• Be sure that you are pointing
the top of the remote control
.toward the TV from a
distance of no more than 20
feet.
• See "Getting Ready to Use
the Remote Control" in
Chapter 1, which contains
pointers for using the remote
control
• The TV takes several
seconds to respond to button
commands,
• Use the ENTER key to avoid
delays.
. See "Changing Channels" in
Chapter 3, which explains
the function of the ENTER
button,
• You can't access a channel,
• Be sure that the channel you
want to view is programmed into
memory.
See "Memorizing Channels" in
Chapter 3, which explains how
to program channels into the
TV's memory.
• Check that the TV is tuned to
the correct input source (anten-
na) for that channel.
See "Selecting the Input
Source" in Chapter 3, which ex-
plains how to change the input
source,
76 Chapter 5: Troubleshooting