Mitsubishi CS-31301 Owner's Manual page 42

Using your remote control to operate your VCR
After you have set up your remote control for your particular brand of VCR,
you can use the remote to operate your VCR.
C) Set the TV/VCR iAUX switch on the re.mote control to "VCR" or "AUX."
(_ Point the remote control at the VCR and press the desired buttons.
If you are using a Mitsubishi VCR, you will be able to use all of the buttons
on the remote control to operate your VCR except for MUTING, VOLUME,
and the PIP function buttons.
If you are using another brand of VCR, you can use the POWER, SCAN,
REC, STOP, PAUSE, REW, PLAY, and FF buttons to operate your VCR.
Using your remote control to operate your cable box
After you have set up your remote control for your particular brand of cable
box, you can use the remote to operate your cable box,
(_ Set theTV/VCR/AUX switch on the remote control to "AUX" or"VCR'.'
(_) Point the remote control at the cable box and press the desired buttons,
Only the POWER and SCAN buttons can be used when operating your
cable box.
Getting Started 43