Mitsubishi CS-31301 Owner's Manual page 47

Changing channels (cont.)
_" Important:
Important:
using the quick view option
To alternate between the current channel
and the last one viewed:
0 Press the quick view (Q,V.) button on
the remote control.
Eress the Q.V, button again to view the
original channel
Quick view (Q,V.) is not available when you operate the Super Quick View
(SQV).
entering a channel into super quick view
tuning
QV
Select your desired channel with the
channel control (SCAN),
O
While the channel number is still dis-
played on the screen, press ENTER.
The letters "SQV" will appear under
the channel number, If "SQV" does
not appear, press ENTER until it does,
_1 Repeat steps _ - O until all desired
channets are memorized.
Press the quick view (Q.V,) button to
cycle through the channels you have
selected,
Up to ten channels can be memorized in Super Quick View, If you try to
memorize more than ten channels, the letters "SQV" will flash, telling you that
the memory is full, You must delete a channel from memory before adding a new
one,
Select the channel you wish to delete from Super Quick View memory by
pressing the channel control I SCAN) or the quick _,iew (Q.V.) button.
While the channel number is still displayed on the screen, press the CAN-
0 *' g*
CEL but n. The Icers SQV will disappear from under the channel
number, and the channel will be deleted from Super Quick View memory.
48 Chapter 3: r)perating Your TV