Usingthe Menusto Setthe Time - Mitsubishi HS-U760 Owner's Manual

tape(Tape)
Adjust this function to ensure the accur_,cy of the Tape Remain-
ing display. If you are using a tape that !s two hours long or less
(labeled T-30 through T-120), set this function to "T-120." If you
are using a tape labeled T-160, set the fi:mction to "T-160." If you
are using a tape labeled T-180, set the fi:Lnction to "T-180." You
cannot use this function with a tape that is less than 30 minutes
long, or with a tape labeled "T-210."
Intelligent p icture (I.P.Switch)
This function is used to turn on the Inr, elligent Picture (I.P.)
circuitry, which automatically maximize_ picture quality. Set the
switch to "ON" when playing an older tape, a poor quality tape, or
rental tapes. Set it to "DUB" when you are using the HS-U760 to
dub to another VCR.
sharpness (Sharpness)
Use this function to adjust between sharp (+) and soft (-) picture.
Usingthe Menusto Setthe Time
This section will show you how to use the on-screen menus. You
will use the menus to operate many features, such as setting the
time, programming to record, and memorizing channels.
Your choices are:
Customize choices
Memorize channels
Add/delete channels
Set VCR Plus+
Guides
une--
Year _99_
Date 1 Thursday
Clock 12:00P_
Daylight savings (OFF)
Beforeyou begin, youneed to know:
• how to view the picture coming from your VCR (page 25),
• that you use the ADJUST dia] an(] shuttle ring on the
remote control, not: on the front ]panel, to use the menus.
O
Make sure you are viewing the picture coming from your
VCR. Then, press the MENU button _n the remote control.
You will see the '%CR Main Menu." Make sure the cursor is
next to the words "First Time Set-Up." If it is not, use the
ADJUST dial to place, the cursor there.
Turn the shuttle ring right. The "First Time Set-Up" menu
will appear. The cursor will be next to "Set the clock." Turn
the shuttle ring right
@) You will see the "Set r,he clock" menu. The cursor will be next
to the word "Month." rurn the ADJUST dial until the correct
month appears on screen. Turn the slmttle ring right.
Month Ju_e
Date I Thhrsday
Clock 12:00PM
Daylight savings (OFF)
O
The cursor automatically moves to Lhe word "Year." Turn the
ADJUST dial to set the year. Turn the shuttle ring right.
31