Chapter Three; Operating Your Vcr; Setting Up Your Vcr For The First; Setting Up Your Vcr If You Are Using - Mitsubishi HS-U760 Owner's Manual

A CHAPTER THREE
Operating Y ourVCR
Now that you've completed your antenna, VCR, and TV connec-
tions, you're ready to start enjoying your equipment. To get the
most satisfaction out of your VCR, you sh _uld carefully read the
two sections, "Setting Up Your VCR for tile First Time" and
'aCiewing the Picture Coming from Your VCR." Then you can start
exploring what your new VCR can do.
In this chapter, you'll learn:
Setting Up Your VCRfor the First Time
Usingthe Remote Control
Viewing the PictureComingfrom Your VCR
$ Loading and UnloadingTapes
Playing a Tape
$ Selectingthe On-screenLanguage
Using the Audio and Video Functions
Using the Menusto Set the Time
Programmingthe VCR to ReceiveTV Channels
0 Setting the VCR Plus+ GuideChannel Numbers
Recording
Setting Up YourVCR for the FirstTime
It's important that your VCR is set up correctly before you try to
use it. If you carefully read this section, you will avoid confusion
later and get the most out of operating your system.
0
This section teaches you about:
• Setting up your VCR if you are using a regular TV, and
• Setting up your VCR if you are usiag a monitor TV.
Setting up your VCR if you are using a reqularTV
Turn on your TV and tune it to channel 3 or 4, whichever is
NOT used for broadcast in your area.
Look at the back panel of the VCR and set the VIDEO CHAN-
NEL switch to channel 3 or 4 (the sarae channel to which you
tuned the TV in step _).
Turn the VCR on by pressing the POWER button.
21