Advertisement
Available languages
Available languages
Oven Cookin
To cancel
the Clock
display:
If you do not want the time of
day to display:
Press and hold the CANCEL and Clock
pads for three seconds, The time of day
will disappear from the display
When the clock display is canceled,
press
the Clock pad to briefly display the time
of day.
To restore
the Clock
display:
Press and hold the CANCEL and Clock pads for three sec-
onds. The time of day will reappear in the display.
Timer
The timer can be set from one minute (00:01) up to 99 hours
and 59 minutes (99:59).
The timer can be used independently
of any other oven
activity,
It can also be set while another oven function
is
operating.
The Timer does not control the oven,
It only controls a
beeper,
To set the Timer:
_mer
I
Press the Timer pad.
• 0:00 lights in the display,
• The colon flashes in the display,
2, Press the More+
or Less- pad until the
correct time appears in the display.
• The colon will continue
to flash.
3, Press Timer pad again or wait four seconds,
• The colon continues
flashing
and the time begins
counting
down.
• The last minute of the timer countdown
will be displayed
as seconds.
4. At the end of the set time, one long beep will sound.
To cancel
the Timer:
1
Press and hold the Timer pad for three seconds
OR
2, Press the Timer pad and set the time to 00:00,
Locking the Controls
The touchpad
controls can be locked for safety, cleaning, or
to prevent unwanted
use. They will not function
when locked.
If the oven is currently in use, the controls cannot be locked.
The current time of day will remain in the display when the
controls
are locked.
To lock:
Press and hold the CANCEL and Cook &
Hold pads for three seconds.
LOCK flashes in the display.
To unlock:
Press and hold the CANCEL and Cook & Hold pads for three
seconds
LOCK disappears
from the display.
Fault Codes
BAKE or LOCK may flash rapidly in the display to alert you if
there is an error or a problem.
If BAKE or LOCK flash in the
display, press CANCEL pad. If BAKE or LOCK continue
to
flash, disconnect
power to the appliance.
Wait a few minutes,
and then reconnect
power. If the flashing
still continues,
disconnect
power to the appliance
and call an authorized
servicer,
11
Advertisement
