NordicTrack COMMERCIAL 1750 User Manual page 12

Ntl14010.2

Hide thumbs Also See for COMMERCIAL 1750:

12. Remove the packaging material from the bottom

of the Frame (56). See the inset drawing.

Make

sure that the 1/2" Rear Leveling Foot Nuts (111)

are threaded all the way onto the Rear Leveling

Feet (60), Turn the two Rear Leveling Feet all

the way into the Frame.

Lower the Frame (56) (see HOW TO LOWER

THE TREADMILL FOR USE on page 28).

If one of the Rear Leveling Feet (60) doesn't sit

flat on the floor, turn the Rear Leveling Foot until

it does and then tighten the 1/2" Rear Leveling

Foot Nut (111) against the Frame (56).

13. Press the Grommet (81) into the square hole in

the Base (97).

14. Make sure that all parts are properly tightened

before you use the treadmill.

If there are sheets of plastic

on the treadmill decals, remove the plastic, To protect the floor or carpet, place a mat under the treadmill,

Note: Extra hardware may be included, Keep the included hex keys in a secure place; one of the hex keys is

used to adjust the walking belt (see pages 30 and 31).

Ntl14010.2