Tm And Menus - Mitsubishi Electric WD-73727 Owner's Manual

Using the GUIDE Button to Display ChannelView
TM
and Menus
The GUIDE Button
Please refer to the separate TV Guide On Screen® User's Guide for details about using the GUIDE button with TV
Guide On Screen. When you are not using the GUIDE for the TV Guide screens, pressing GUIDE allows you to see
NetCommand® controlled program guides or menus.
GUIDE and Devices
{1394 or mRControlled)
For NetCommand-compatible satellite receivers and
some cable boxes, GUIDE displays the on-screen
programming guide for the receiver or came box. Press
ADJUST A 'V ,_ _ and ENTER to navigate the displayed
Guide. For NetCommand-compatibie satellite receivers,
you may also be able to use the number or other
additional buttons.
Recording a Current Program
To record a current program, press REC (record) when
your program choice is highlighted on the program list
in ChanneiView. A red "R" wii[ be added after the input
name. The TV will immediately switch to the selected
channel and start recording.
For NetCommand-compatible DVD players, GUIDE
displays the DVD disc "top" menu (not the setup menu).
For AiV Discs, press GUIDE to display the Track List
screen. For [EEE 1394 devices with digital connections,
press GUIDE twice to display the device's Guide. For
memory cards, press GUIDE to display a JPEG thumbnail
menu (video) or a playlist menu (audio).
GUIDE and the Device Selection Menu
For compatible traditional VCRs, press GUIDE when
the VCR is highlighted on the Device Selection menu to
change the VCR's input.
When the AiV Receiver icon is highlighted in the Audio
Section, pressing GUIDE switches the A/V Receiver from
analog audio to digital audio and vice versa, if supported.
GUIDE and the Record To Menu
When in the Record To menu, pressing GUIDE will display
the current list of programmed recordings. Please see
Record List, page 62 for more information.
Figure 5. Channe/View screen, current programs
Recording Future Programs
To record a future program, press ADJUST A or _' to
select the channel you want to record from. For detailed
program information, press ADJUST _, to return to basic
information press ADJUST 4. Press REC (record) when
your choice is highlighted. A red "R" will be added after
the input name. The message, The recording has been
added to the Record List will display. To view, change or
cancel a recording, use the Record List (page 62).
GUIDE and Channe[View
Figures 5 and 6
ChannelView is available for antenna inputs not
associated with TV Guide. Press GUIDE while viewing
ANT-1 or ANT-2 to display a list of available memorized
digital channels (D) and analog (A) channel information
(if available from the broadcaste0. This list is called
ChanneIView
TM
ChannelView for digital channels wiii show the major and
sub-channels (or bitstreams). Analog channel information
wiii display as sent. Press ADJUST A or T to scan
through all the channels in memory one by one. To cycle
through the choices quickly, press CH A or V_
For detailed program information, press ADJUST _,
to return to basic information press ADJUST 4. This
information is sent by the broadcaster. If limited data
is shown or no program data appears, it is because the
broadcaster is not sending the information. This is not a
defect of your TV.
Figure 6. ChannelView screen, future programs
IMPORTANT
For complete Channe[View information to be
refreshed daily, the TV must be powered Off
from 5 to 15 minutes a day, depending on the
number of channels in memory, if the TV loses
power, the program listings wi[[ be temporarily
lost,
60 Chapter 4. Nefcommand Functions