Table of Contents
Advertisement
Chapter 3: Operating YourVCR
SettingUpYourVCRfor the FirstTime(cont.)
O
If you tuned
the TV to channel
4 in step O, press the CHAN-
NEL a button
and the ONE KEY PROGRAM
button
on the
front panel at the same time with the VCR turned
off. The
word "Ant ch4" will display
on the front panel display
of the
VCR and the VCR will send signals
on channel
4. (If you
tuned
the TV to channel
3, you don't need to do this.)
Turn
the VCR on by pressing
the POWER
button.
DImportant:
The VCR will return
to its initial
setting
(channel
3) if you press
the CHANNEL
_ button
and the ONE KEY PROGRAM
button
on the front panel at the same time with the VCR turned
off.
Setting upyour VCR if you are using a TV equippedwith Audioand
Video Inputs(ModernTV)
Turn on your TV and switch
it to the correct external
input.
(For most Mitsubishi
TVs, this means
pressing
the TV's
INPUT
button
until you see the words "Ext-l"
on the screen.)
Turn the VCR on by pressing
the POWER
button.
Usingthe RemoteControl
In this section, you'll learn how to set up and use your remote
control.
This section includes:
• Using the remote
control
to operate
the VCR, and
• Using the remote
control
to operate
the TV.
Using
the remote control to
operate
the VCR
installing the batteries
Unpack
two AA size batteries.
To remove the back cover, press
the ridged area gently,
then
push the cover in the direction
of the arrow and lift.
Load the batteries,
making
sure the polarities
(+) and (-) are
correct.
operating the remotecontrol
Press the VCR button
on the remote
control.
This "tells" the
remote
that you want
to control
the VCR.
While within
23 feet of the VCR, point the remote
control
toward
the VCR and press the buttons
you desire.
18
AIO
Advertisement
Table of Contents
