Table of Contents
Advertisement
Chapter3: OperatingYourVCR
Setting Up YourVCl:lfor the FirstTime(cont.)
[>Important:
0
If you tuned the TV to channel
4 in step O, press the CHAN-
NEL •
button
and the ONE KEY PROGRAM
button
on the
front panel at the same time with the VCR turned
off. The
word "Ant ch4" will display
on the front panel display
and the
VCR will send signals
on channel
4. (If you tuned
the 'I_V to
channel
3, you don't need to do this.)
O
Turn the VCR on by pres,;ing
the POWER
button.
The VCR will return
to its initial
setting
(channel
3) if you press
the CHANNEL
•
button
and the ONE KEY PROGRAM
button
on the front panel
at the same time with the VCR turned
off.
Setting up your VCR if you are using a TV equippedwith Audio
and VideoInputs(ModernTV)
O
Turn on your TV and switch it to the correct
external
input.
(For most Mitsubishi
TVs, this means
pr_,ssing the TV's
INPUT
button
until you see the words "Ext, Input,
or Video"
on the screen.)
Turn the VCR on by pressing
the POWEr_ button.
€ Usingthe RemoteControl
In this section, you'll learn how to set up and use your remote
control.
This section
includes:
• Using the remote
control to operate
th_ VCR, and
• Using the remote
control to operate
the! TV.
Usingthe remotecontrol to operatethe VCR
installing thebatteries
O
Unpack
two AA size batteries.
To remove the back cover, press the ridged area gently:, then
push the cover in the dire(:tion
of the arrow and lift.
0
Load the batteries,
making
sure the polar! ties (+) and (-) are
correct.
operating the remote control
O
Press the VCR button
on tlhe remote
control. This "tells" the
remote
that you want to cc_ntrol the VCR.
While within 23 feet of the VCR, point the remote
control
toward
the VCR and press the buttons
yol: desire.
18
Advertisement
Table of Contents
